Ford Powerstroke Diesel Forum banner

2005 Ford f250 20x10 -24 offset

1K views 2 replies 3 participants last post by  autolover3 
#1 ·
Hey guys I am ordering a set of fuel wheels 20x10 with -24 offset.

I am trying to figure out if a 35" tire will clear or not? I see some people are pulling the wheel liner back with some zip ties and that works. I just want to make sure that is all i have to do. I dont want to cut the front bumper or anything like that.

I have a 3" rough country lift.

Wheel is 20x10 -24 offset
Tire is 35x12.50r20

Thank you in advance.

Pic of how much the inner liner is pulled back would be great!
 
#2 ·
It will be very close. But from everything I have read, no it will rub a bit. That being said I never knew that the 12.50" tires are a floating load tire and really have insufficient load carrying capacity. I chose to go with 295/60r20 on my new american force wheels. Those tires are rated at 3750 lbs each vs 3100. I got some atturo's from customoffsets.com for 959 shipped.

Just my .02 as I just read this to death recently as I had a harley oem wheel crack and went on the hunt for a new setup.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top