07 hid ballast problem

[TampaSteve]

KINGRANCH: Are you trying to hook up HID's in your headlights? If so I will try to explain....Steve

[KINGRANCH727]

Yeah steve.. My kit was supposed to come with a relay and did not. I got one from napa and can't figure it out. If you're ever in st. pete i'd pay you to do it...

[TampaSteve]

I'm pretty much handicapped. But will assist if i can.

---

Last edited by TampaSteve : 10-23-2009 at 04:25 AM.

[xjtony]

Originally Posted by KINGRANCH727

XJTONY I just bought 2 relay kits from napa.. can you please better explain how your wired your kit? I'm having a lot of trouble here thanks!

Sure. The factory headlight harness has 3 wires- High beam, low beam, and a ground. I just cut the low beam power wire and the ground wire, crimped on male/female connectors and connected that to 2 headlight pigtails i bought from autozone.

But after all that i noticed how they are supposed to be wired without splicing. The bulb harness has a 2 prong connector that will plug into the ballast, on the end of the 2 prong harness is 2 wires with male spade terminals. That is actually supposed to be inserted into the appropriate Power and ground terminals in the factory headlight plug.