Low beam problems

Firefighter95 · #1 (**permalink**) 07-31-2011, 08:14 AM

I have a 06 f250 and 2 days ago I was going out to my truck around 830 and go out and my low beams didn't work but my high beams and my fog lights work. So I just drove with the high beams on and then eventually my low beams came on. I changed the fuses and it still do it. Any suggestions or fixes???

ClarkSJ · #2 (**permalink**) 07-31-2011, 09:07 PM

Could be the connector at the back of the lamps. Replacements are available, including ceramic connectors. Wiring is marginal and they can overheat.

***JSchuricht*** · #3 (**permalink**) 07-31-2011, 10:32 PM

Quote:

Originally Posted by ClarkSJ

Could be the connector at the back of the lamps. Replacements are available, including ceramic connectors. Wiring is marginal and they can overheat.

Exactly where I would start. Try wiggeling the plug with the lights on to see if you can get it to act up.

Firefighter95 · #4 (**permalink**) 08-02-2011, 03:10 AM

Thanks. I'll check it out and let y'all know

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement