![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.0L Electronics Discussion TV's, Radios, everything electric and NON-Performance. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
The other night i was headed home and went to switch from brights to low beams and wam no headlights.
Not even brights. Luckily i ran my big off road lights all the way home making alot of people mad in the process. I checked bulbs and even switched them out with others. Checked all fuses. All were good. After awhile of screwing with the multifunction switch i finally got brights but no low beams. My question is could the wires come loose in the switch and if so how much of a painis it to change it. Im really not big on the idea pully the steering wheel and everything apart.
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
Same thing happened on my F-150. The turn signal switch wears out over time. Easy to replace only a few screws.
|
|
|||
|
yup not too expensive either
|
|
|||
|
Anybody have a write up on how to do it? It kinda worries me on taking the steering column apart.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|