Loss of almost all power on highway and would not restart after shut off. Pulled code 2290 from EDGE Insight. Plugged in scangauge II and found only 350PSI on ICP.
Have issues lately with fuel gauge not going to Full mark when filling.
No start this morning, towed to shop. They put fuel in it and it fired no problem, I filled it yesterday and drove it for an hour before shutting it down. Ran it hot and had no issue starting again. Went to gas station and it took $16.00 to fill tank.
Shop figures that the loss of power and no start is either coming from the fuel system and want to drop the tank to investigate farther. It still showed 3/4 tank last night when it would not start on the highway. Either that or they said there is a fuel pump tied somehow into the HPOP or the high pressure system.
Thoughts?
Have issues lately with fuel gauge not going to Full mark when filling.
No start this morning, towed to shop. They put fuel in it and it fired no problem, I filled it yesterday and drove it for an hour before shutting it down. Ran it hot and had no issue starting again. Went to gas station and it took $16.00 to fill tank.
Shop figures that the loss of power and no start is either coming from the fuel system and want to drop the tank to investigate farther. It still showed 3/4 tank last night when it would not start on the highway. Either that or they said there is a fuel pump tied somehow into the HPOP or the high pressure system.
Thoughts?