Looking for costs of updates to 6.0

[TnSmokey]

I have a 06 F350 4x4 KingRanch w 62000 on her. I'm having no issues, but I'm looking at making some small changes. My question is what would you expect to pay a reputable mechanic for the installation of the listed work below. Also what else would you look at changing. This is a drive to work and around Truck. Not a regular heavy hauler. Looking for a ball park figure. I appreciate the input.

Installation of:
EGR Delete Kit
AM Oil Cooler
STC Fitting
4" exhaust kit straight pipe from Turbo back
New SCT Tuner
Cold air intake/enclosed

[jmeaby]

Most of what u have out Down isn't to hard to do if u take your time. I have seen oil cooler replace cost listed around 1000 somewhere I forget that shop name though. My advise get the stuff and do it it isn't bad. I got my 4 inch ss turbo back cat delete for 475 out the door

[TnSmokey]

Thanks for the info jmeaby, and I see your point on doing it yourself.

[jmeaby]

It was the first really big job I did by myself, but it wasn't that bad. The intake is only like a 25 min job. plus any questions ppl will help on the org here too. Just don't wanna see someone spend money when its not to bad to just do it. Look up on youtube another dickerd 6.0 by 1 puglife he is goofy but there are some good points. Also related videos there is a rwslly good one of a ford mechanic tearing the truck down that will teach u a lot

[jmeaby]

Fyi if u do a delete or a block off on the truck in the up pipe u will have a scoop in there that needs to come out. It's on the up pipe where the egr cooler connects