|
Turbo problem
Guys, I appreciate any help you can give me. I just spend the weekend changing the EGR cooler hose, the little orange one under the turbo, and the ICP sensor on my 03 6.0L. I had to remove the Turbo in 2 pieces because the bolts securing it to the bracket were seized, and there was no other way. I put it all back together and crossed my fingers. The engine seems to work fine, but unfortunately the turbo sounds like its dragging. I know its spinning freely, but I cant figure out what could be causing the sound. I drove the truck a few miles and I dont think I am getting any power from the turbo. I appreciate any help.
|
11-26-2007, 07:21 PM
Linear Mode
