06 6.0 won't start code2885

05 Pstroker · #1 (**permalink**) 12-29-2012, 12:43 PM

Came out of store this afternoon and crank but no start. ICP pressure was 125-140. As I keep cranking pressure continually goes up and is up to 250. Any ideas would be very helpful (replace ICP?). Thanks

**southend** · #2 (**permalink**) 12-29-2012, 12:45 PM

Hpo leak, stc fitting, dummy plugs, or standpipes, likely. Can you monitor ipr%?

Sent from my phone that somebody didn't help me get.

05 Pstroker · #3 (**permalink**) 01-07-2013, 07:03 AM

Sorry for not replying after fix. Was trying to get out of town to take my kids hunting for the week.. I changed the ICP sensor and fired right up. Now I have a #4 glow plug going out. At least it starts and runs great.

**southend** · #4 (**permalink**) 01-07-2013, 07:59 AM

Thanks for the update.

Sent from my phone that somebody didn't help me get.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement