Torque specs/sequence

[JD_MILLS]

Got my heads back from being milled just about ready to start putting it back together does anyone know the torque specs and sequence to the bolts got the one for the studs just don't know about all the others. Any help would be greatly appreciated.

Sent from my SCH-I500 using AutoGuide.Com Free

[justinmix]

Which bolts are you talking about? Here's some specs.....

Cylinder Head and Valve Train Lifting eye, front, (M10 x 30)
41 ± N·m (30 ± 3 lbf·ft)

Lifting eye, rear, flat socket head (M10 x 35)
41 ± N·m (30 ± 3 lbf·ft)

Crankcase breather nuts
7 N·m (60 lbf·in)

Fuel injector hold down bolt
33 N·m (24 lbf·ft)

Rocker arm fulcrum plate (M8 x 65)
31 N·m (23 lbf·ft)

Glow plugs
19 N·m (168 lbf·in)

Injection Control Pressure (ICP) sensor
12 ± 2 N·m (108 ± 18 lbf·in)

Oil rail assembly mounting bolts (M6 x 25)
13 N·m (120 lbf·in)

Crankcase-to-head tube assembly
82 N·m (60 lbf·ft)

Valve cover bolts and studs
9 +1/-2 N·m (72 ± 12 lbf·in)

Oil fill extension
14 ± 1 N·m (120 - 132 lbf·in)

Rear heat shield (M10 x 16)
49 ± 5 N·m (36 ± 4 lbf·ft)

[thomaslord84]

Powerstroke 6.0L Bible

I believe that torque specs start on page 84.