6.0 wont start

wlsmithjr1960 · #1 (**permalink**) 09-03-2009, 03:59 PM

Hey, I've got an 05 f-450 6.0 with 16ft flat bed everything factory, no mods, coming home Monday, lost all power, turbo would not spool up, limped home about 2 miles, parked it, and now it wont start, it will just turn over. Anybody with any ideas? The mileaghttp://www.powerstroke.org/forum/images/smilies/dunno.gife on the truck is 114,000. Thanks: wlsmithjr1960

**Goose350** · #2 (**permalink**) 09-03-2009, 04:03 PM

Do you have any way of getting a scanner and pulling codes?

wlsmithjr1960 · #3 (**permalink**) 09-03-2009, 04:11 PM

The only thing I have is an Edge Juice and Attitude, just looking for ideas. Thanks for the reply.

**Goose350** · #4 (**permalink**) 09-03-2009, 04:12 PM

have you pulled the codes from the Edge?

wlsmithjr1960 · #5 (**permalink**) 09-03-2009, 04:13 PM

I'm going to try that on Friday and see what it comes up with.

**Goose350** · #6 (**permalink**) 09-03-2009, 04:21 PM

Need to get the codes pulled before you can do anything and if you could find something better to read the codes that would be great

wlsmithjr1960 · #7 (**permalink**) 09-03-2009, 04:42 PM

Don't have anything else that I can use right now, another question is my Edge is on my F-250 can I take it off it and pull the codes on the F-450. Thanks

**Goose350** · #8 (**permalink**) 09-03-2009, 07:25 PM

I dont see why not but I am not 100% sure.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement