axle / outer wheel assembly diagrams

[jdouville]

Hi everybody i'm new to this site i'm 19 and i bought an 05 f350 about 9 months ago (patch has been real good to me) anyway my wheel bearings just went damn tire near fell off on the highway and neead a diagram for the axle and outer wheel assembly. i know i am capable of this repair on my own, not that i really have much of a choice, but it would make things a whole lot easier if i had the diagrams
thanx everybody sorry about the long post

[BLEnt]

this is ford shop book.

2005: https://www.motorcraftservice.com/pu...20/S5OMAIN.HTM

[Jon]

Outer hub nut needs to be around 70 ftlbs then back it off 90 degrees and retighten to about 20 ftlbs.

Thats for a dually? Is it a dually?

For single rear wheel.







Torque to about 60 ft lbs and back it off 7 teeth or clicks.

---

Last edited by Jon : 06-28-2008 at 02:24 PM.

[jdouville]

thanks guys the assembly i'm looking for is for the front axle with the locking hubs and abs sensor though still helpfull thanks

[Jon]

Wish you would have said what you have and what end the problem is on. Is it a 2 wheel drive or 4?

[jdouville]

4 wheel drive lest the hubs would loc air , blew the wheel bearing and everything burned up epecially the locking mechanism thanks again