Hey Guys...
I know there are a lot of posts about this and i've read through most of them but i can't seem to find the exact answer...
I have an 06 250 and it has extremely loose steering. I messed around with all the front end parts and found nothing loose or clicking. The steering gear seemed to have some play in it when i fiddled with it so I replaced the steering gear (it was leaking pretty good too so it needed to be done) After replacing this my steering is a little bit tighter but not much.
about a year ago i wanted to get the truck aligned and they told me they couldn't do it because my ball joints were bad. While taking the truck apart I noticed that nothing seemed loose. Even jacked up I can't get the front tires to move up or down or even side to side. Can my ball joints still be bad?
What should my next step be?
Thanks for all the help!!
I know there are a lot of posts about this and i've read through most of them but i can't seem to find the exact answer...
I have an 06 250 and it has extremely loose steering. I messed around with all the front end parts and found nothing loose or clicking. The steering gear seemed to have some play in it when i fiddled with it so I replaced the steering gear (it was leaking pretty good too so it needed to be done) After replacing this my steering is a little bit tighter but not much.
about a year ago i wanted to get the truck aligned and they told me they couldn't do it because my ball joints were bad. While taking the truck apart I noticed that nothing seemed loose. Even jacked up I can't get the front tires to move up or down or even side to side. Can my ball joints still be bad?
What should my next step be?
Thanks for all the help!!