Transfer Case Fill Plug

vestjam · #1 (**permalink**) 09-29-2012, 04:55 PM

2006 6.0 F350 Dually. I just picked it up a week ago and I started to change all the fluids. I drained the transfer case. The fluid was definitely in need of a change. Anyway, I went to remove the fill plug (10MM hex) and the thing would not turn. I tried heat and still nothing. Here comes the problem... I hit it with an air wrench and zing... completely stipped the 10mm hex on the plug and now it's just a nice round hole... The plug didn't budge. Any thoughts out there?

vestjam · #2 (**permalink**) 09-30-2012, 09:02 AM

Situatation resolved... Air chisel's ROCK! Case is untouched and I still have all the threads on the plug hole.

HarvestingInternationally · #3 (**permalink**) 10-28-2012, 03:37 PM

Nice...that'll teach the next one not to budge lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement