Quote:
Originally Posted by alabamafrog
I didn’t word that very clearly, IF it were over boost it would only come on during a hard run and may blink or stay on for a few seconds then go back off. If it is staying on all the time then it is probably some other issue like chip contacts or an actual engine problem. A good scan will tell you if it is a real problem. First thing to do would be to remove the chip and see what it does then reinstall the chip after making sure both sides of the computer board contacts are clean. If the light still keeps coming on then go get a good scan for codes.
|
Alright, I'll try that first, I tried once again to pull the codes it still read "No DTC's stored", I couldn't get the Superchips programmer to work for me...Is it possible that I cleaned them too much as said above? If so am I screwed and have to get a new computer? But the truck runs awesome! There is no issues at all, but I am just worried by this SES light...