Quote:
Originally Posted by kinghawg98
Dave- Where abouts are you in chuck town.....I've not seen your truck before.
|
I work in North Charleston but live in Summerville....Retired from the Air Force a few years ago..
Quote:
Originally Posted by NCHornet
I also would be careful about drilling through the chrome part of the bumper, I have seen a lot of rusting from people doing it, even if they seal the edge with galvanized paint it still rusts over time. If you look on my pics the plastic cowl piece under the chrome part is a good place, these are usually black or in my case painted white, there is a metal bumper behind the plastic so it is a nice rigid mount, but if you get any rust around the hole it won't show.
|
You are 100% correct on the rust thing. I have seen folks drill into chrome and they immediatly start rusting once you comprimise the seal. I did the same thing you did on the plastic piece under the bumper. I got lucky, I have the dark grey piece under the chrome and my marinco plug is black so you hardly even see it. Heck sometimes I get asked if there is something on my bumper....running stealth for sure. Nice you have there for sure...Dave