[quote=strokin_early_99;404881]I would say the front bearing in an hour is safe to post on a forum and not look like I was a show off.....LOL.....J/k../QUOTE]
Yeah I was fortunate enough to have to replace the hub on the side of the road (actually gas station) it took an hour there with limited tools. The next week we did ball joints on my brothers truck and I can easily do the hub in a 1/2hr useing the air tools. After you get the wheel off everything comes off with 13/16's socket. The ball joints the first time are a pain but Marc did an excellent write up and makes it extremely easy. I used the bad hub bearing as the knuckle seal tool. After you have done it once you should be able to do the whole truck in a 6 hr or less window. I would open a shop but I'm not good at diagnosing anything just replaceing stuff, with other people's info.
