[HorseMover]

Originally Posted by CSIPSD

There are only two place's a Pyro Probe should be, in the UP PIPE or in the Manifold... The down pipe is the WORST place you can have it.

If your pyro is in the down pipe you must use 1000 as your red line, because any higher then that and you have NO IDEA what the pre turbo temps are. If its in the down pipe, MOVE IT...

First pic is a drill and tap, clean and neat, can be plugged later if needed.

Second pic is a drill and clamp, Very quick, works good, can leak sometimes.

Third Pic is the #7 piston from an early 99 and a post turbo pyro using an 1100 red line.

Sorry - I meant up pipe. Thanks for the information!