Quote:
Originally Posted by HorseMover
What do you guys think about the thermocouple options - drill/tap the manifold or use the clamp style on the turbo down pipe. I thought that I read that the manifold was a better read?
|
Quote:
Originally Posted by 460+
Ive got mine in the down pipe some say its better in the manifold, but if its only reading one bank whats the other doing. Semis are in down pipe.
|
There are only two place's a Pyro Probe should be, in the UP PIPE or in the Manifold... The down pipe is the WORST place you can have it.
If your pyro is in the down pipe you must use 1000 as your red line, because any higher then that and you have NO IDEA what the pre turbo temps are. If its in the down pipe, MOVE IT...
First pic is a drill and tap, clean and neat, can be plugged later if needed.
Second pic is a drill and clamp, Very quick, works good, can leak sometimes.
Third Pic is the #7 piston from an early 99 and a post turbo pyro using an 1100 red line.