If you want it to last I’d recommend a good clean running intake like the Baldwin PA2818 to save from dusting the engine and doing the fuel tank and prepump filter mods to save the injectors by keeping air and trash from a bad load of fuel out and a temp gauge on the tranny with Amsoil or some other good synthetic fluid in it. I have had to rebuild the engine, replace the injectors, replace the tranny, alt, water pump, ball joints, tie rods, brake rotors, turbo, starter (twice), pcm, door actuators, etc, etc, and mine has 210,000 miles on it now. I'd guess that just the parts bill for mine is over $12,000 so far with me providing all the labor and shopping around for prices.