Quote:
Originally Posted by strokin_early_99
With the new transmission make sure you get a tranny temp gauge. Even with a stock truck even a tranny can get hot and heat kills transmissions. You don't want to fry that new trans. At least with a tranny temp gauge you can pull over and let it cool down if it gets too hot.
If you are going to put in a chip of any kind, make sure you do the required supporting mods as well. Intake, exhaust, wicked wheel(or ATS compressor housing) and gauges.
Keep Strokin'
|
Thanks for the advice. At the moment I am still trying to figure out what mod path I want to take. Gauges vs evo 2 vs quadzilla and so on..... I dont really like the many gauges look but I really like the DP chip features and programs. I dont know yet..... this tranny thing is a MAJOR setback in my mods
but i guess that is ok for now. At least it did not blow up when I am in the middle of nowhere stranded at jim-bobjoes tranny shop with tooth picks putting my tranny back together. O well