|
LOST CYL'S 2 4 6 8 NEED HELP
96 PSD , standard tranny . valve cover wiring harness was burnt on hot side of # 2 injector and burnt the male plug from engine harness. replaced the harness end with kit from ford, replaced both inside harnesses and valve cover gasket , still dont have cyl's 2 ,4 ,6 , & 8 . they work under the buzz test but with engine running there is no difference in roughness by unplugging one or both connectors on 2,4,6,8 . checked injectors for ohms test and all passed, checked wiring harness and its good. wandering if the control box for the injectors can be bad and still run cyl's 1,3,5,7 ? codes now are P0606 , P1111 , CYL BALANCE TEST SHOWS 2,4,6,8, BAD? NEED HELP BEFORE I PULL MY HAIR OUT...... THANKS
JEFF
|