View Single Post
  #1 (permalink)  
Old 07-01-2009, 08:18 AM
ottr1967 ottr1967 is offline
Powerstroke.org Rookie
 

Join Date: Jun 2009
Posts: 5
Question Front Leaf Spring Advice

I have an '03 F250 fx4 with the 6.0L. My driver's side front spring has sagged over an inch more than the right side. I occaisonally bottom out the driver's side, and I have a noticable squeak from this side also.

Looking at my spring code on the door panel, I have code UP. I looked in the maintenance section of the forum and it indicates that my front springs are the 4800 lb set, I am not sure about the rear.

Any advice on whether I should replace with the stock springs, upgrade to a higher rate stock spring, or go with an aftermarket set?

Any help is appreciated.
Reply With Quote
Sponsored Links