Quote:
Originally Posted by TANK'S 250
Like you said,...though it isn't recommended,...I still haven't had an issue with anything getting in there,...and I offroad alot,...water, mud, etc
yup...once it is in 2 pieces,...it's done.
|
Tank, have you inspected the inside of your axle tubes lately?
Im curious as to what condition yours are in since yours have been bad.
about 3 months ago i did these seals on an excursion thats 95% street the owner said they were bad for about 2 years and the insides of his tubes were terrible, scale, rust,flaking (chunks of the tube) i got it all cleaned out but there were huge pitts.
Most of the other trucks i have done just have surface rust inside but i replaced them shortly after they failed.
After cleaning both sides i use a thin coat of grease on the insides of the tubes to slow down rust on the trucks i do.