Quote:
Originally Posted by straycat
The EBPV is located on the exhaust side of the turbo, it has a harness going to it follow the harness and unplug it. The only way to increase the boost in the turbo is to change the turbo housing, or install a chip. You can make it spool a little faster by unplugging the red pressure line to the actuator on the drivers side of the turbo, and put it on one of the clamps on the intake boot to keep it out of the way. If you do this it is recommended to have a boost gauge, just to keep an eye on it. Hope this helps.
Gord.
|
Gord,
If I disconnect the EBPV and the red pressure line should I expect to see codes being thrown? Just wondering. I just do not want to jack up my turbo. I have a boost gauge so I can monitor pressure.