Articles - Performance Mods en-us http://www.powerstroke.org/articles N/A http://www.powerstroke.org/articles andy@cougargulch.com 20 http://www.powerstroke.org/articles/articles/11/1/Snow-Performance-Stage-III-WaterMethanol-Installation/Page1.html This is a basic install/write up on the Snow Performance Water/Meth Stage III kit. rodslinger@gmail.com (- Rodslinger -) Fri, 16 Feb 2007 00:00:00 -0500 http://www.powerstroke.org/articles/articles/2/1/60-liter-intercooler-swap-for-the-73-Ford-Powerstroke/Page1.html The swap is relatively inexpensive and not to time consuming. Used 6.0 intercoolers can be had on eBay for around $100-$125. The 6.0 IC is about 30% larger than the 7.3. The original 7.3 PSD intercooler measures 30x18x2 and the 6.0 PSD is 30x21x2.25. tony@gcop.net (G COP) Sat, 28 Oct 2006 00:00:00 -0400 http://www.powerstroke.org/articles/articles/1/1/Adjusting-the-Fuel-Injection-Pump-on-a-69L--73L-Ford-Diesel-IDI/Page1.html This article will hopefully give you some insight on how to adjust your fuel injection pump on 88-93  7.3L Non-Powerstroke, IDI. This will probably work the same way on a 6.9L Navistar(Ford) engine as well. andy@cougargulch.com (Andy Isaacson) Sat, 28 Oct 2006 00:00:00 -0400